De un solo eje

Con eje de alta resistencia para una mayor durabilidad y pisos de anchos en madera o acero, los remolques de un solo eje de Ditch Witch no solo pueden sopotar cargas de 3/4 hasta 3 toneladas, sino que lo hacen con estilo y con muchos opcionales que incluyen juego completo de luces.
  • ASPECTOS RELEVANTES
  • CATALOGO
  • ESPEC. S1A
  • ESPEC. S2A
  • ESPEC. S6B
  • ESPEC. S7B
  • ESPEC. S8B
  • Diseño de un solo eje con superficie en madera o acero, cama abatible o con rampas para facilitar la carga-descarga de equipos de hasta 2586 kg.
  • Puntos de anclaje estandard, cadenas de seguridad y sistema de alumbrado completo incluyendo arnes de cables.
  • Superficie de apoyo plano para el cargado de equipos del tamaño apropiado.
  • Elemntos opcionales incluyen acoples y cadena de seguridad de alta resistencia.
  • Estructura de acero de alta resistencia y ejes de torsion para mayor confibilidad y facil mantenimiento.
  •  
 
SPECIFICATIONS, S1A
DIMENSIONS* U.S. METRIC
Length    
    Overall 126 in 3.2 m
    Bed 78 in 1.98 m
    Tongue 47 in 1.19 m
Loading ramp clearance 9 in 229 m
Coupler heights, adj. 16 in - 18 in 407 mm - 457 mm
Width    
    Between fenders 54 in 1.37 m
    Outside fenders 68 in 1.73 m
Axle center 37.75 in 959 mm
RUNNING GEAR
Axle: 1.75-in diameter, solid, stress-proof
Bearings: Taper roller for maximum load support
Wheels: 8-in diameter, one-piece drop center with five bolt holes
TIRE OPTIONS/PRESSURES U.S. METRIC
5.70-8 C 50 psi 345 kPa
LOAD RATINGS** U.S. METRIC
Empty weight 460 lb 209 kg
Tongue load, max. 200 lb 91 kg
GVWR 2000 lb 907 kg
GAWR 1800 lb 816 kg
MLWR 1540 lb 699 kg
COUPLER OPTIONS U.S. METRIC
Ball 2- or 2 5/6-in diamter  
STANDARD EQUIPMENT
Safety chains: High-test, 3/8-in chains with attaching hooks
Lighting: Turning, running, and clearance lights use 14-gauge wire with commercial connectors
Tie-down rings: Steel forgings secured directly to frame
MISCELLANEOUS OPTIONAL ITEMS
1/4-in diameter links; 9-ft long with grab hooks
Load binder: 12-in long for 3/16-5/16-in diameter chain links
 
*Specifications are called out according to SAE recommended procedures. Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that described. **Load ratings for speeds up to 65 mph (104 km/h).
SPECIFICATIONS, S2A
DIMENSIONS* U.S. METRIC
Length    
    Overall 160 in 4.06 m
    Bed 95 in 2.41 m
    Tongue 64 in 1.63 m
Loading ramp clearance 10 in 254 mm
Coupler height, adjusted 16 in - 18 in 407 mm - 457 mm
Width    
    Between fenders 59 in 1.5 m
    Outside fenders 79.8 in 2.03 m
Axle center 46 in 1.17 m
RUNNING GEAR
Axle: 1.75-in square solid steel, with 4-in drop
Bearings: Taper roller for max. load support
Wheels: One-piece drop center, heavy-duty stell, 15-in diameter with five bolt holes
Brakes: Optional 10 x 2.25-in hydraulic surge system with break-away actuator
TIRE OPTIONS/PRESSURES U.S. METRIC
ST205/75R15 C 50 psi 345 kPa
LOAD RATINGS** U.S. METRIC
Empty weight 770 lb 349 kg
Tongue load, max. 300 lb 136 kg
GVWR 2990 lb 1356 kg
GAWR 2690 lb 1220 kg
MLWR 2220 lb 1007 kg
COUPLER OPTIONS U.S. METRIC
Ball 2- or 2 5/16-in diameter  
Lunette 3-in ID ring  
STANDARD EQUIPMENT
Safety chains: High-test, 3/8-in chains with hooks
Lighting: Turning, running and clearance lights use 14-gauge wire with commercial connectors
Tie-down rings: Steel forgings secured directly to frame
Tongue jack: 5000-lb(2268 kg) capacity swivel stowing jack with footpad
MISCELLANEOUS OPTIONAL ITEMS
Tie-down chains: 1/4- or 3/8-in diameter links: 9-ft long with grab hooks
Load binder: 12-in long handle for 3/16-5/16-in diameter chain links
Springs: Multiple leaf suspension
 
*Specifications are called out according to SAE recommended procedures. Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that described. **Load ratings for speeds up to 65 mph (104 km/h).
SPECIFICATIONS, S6B
DIMENSIONS* U.S. METRIC
Length    
Overall 207 in 5.26 m
Bed 156 in 4 m
    Tongue 51 in 1.3 m
Clearance, measured at jack footpad 8 in 203 mm
Adj. coupler heights 16 in - 22 in 406 in - 556 mm
Width    
Between fenders 62 in 1.58 m
Outside fenders 82 in 2.1 m
Loading ramp, each 30 in 762 mm
Loading ramp angle 18°  
Bed height, at full load 18 in 457 mm
GENERAL U.S. METRIC
Number of axles 1  
Type of coupler 3-in lunette; 2 5/16-in ball  
Type of brakes Electric  
Electrical system 12V DC  
Lug nut torque 95 ft·lb 130 N·m
Safety chain size 3/8 in  
TIRE OPTIONS/PRESSURES U.S. METRIC
ST235/80R16 E 80 psi 552 kPa
LOAD RATINGS** U.S. METRIC
ST235/80R16 E tire    
    Empty weight 2100 lb 952 kg
    Tongue load, max. 975 lb 442 kg
    GVWR 7500 lb 3402 kg
    GAWR 7000 lb 3175 kg
    MLWR 3850 lb 1746 kg
 
*Specifications are called out according to SAE recommended procedures. Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that described. **Load ratings for speeds up to 65 mph (104 km/h).
SPECIFICATIONS, S7B
DIMENSIONS* U.S. METRIC
Length    
    Overall 207 in 5.26 m
    Bed 156 in 3.96 m
    Tongue 51 in 1.3 m
Clearance 8 in 203 mm
Coupler heights, adj. 16 in - 22 in 406 mm - 559 mm
Width    
    Between fenders 62 in 1.58 m
    Outside fenders 82 in 2.08 m
    Loading ramp 60 in 1.52 m
Loading ramp angle 11°  
Bed height, at full load 18 in 457 mm
GENERAL U.S. METRIC
Number of axles 1  
Type of coupler 3-in lunette; 2 5/16-in ball  
Type of brakes Electric  
Electrical system 12V DC  
Lug nut torque 95 ft&middotlb 130 N&middotm
Safety chain size 3/8 in  
TIRE OPTIONS/PRESSURES U.S. METRIC
LT235/85R16 G 110 psi 758 kPa
LT215/85R16 E 80 psi 552 kPa
LOAD RATINGS** U.S. METRIC
Empty weight 1740 lb 789 kg
Tongue load, max. 975 lb 422 kg
GVWR 7500 lb 3402 kg
GAWR 7000 lb 3173 kg
MLWR 5760 lb 2613 kg
 
*Specifications are called out according to SAE recommended procedures. Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that described. **Load ratings for speeds up to 65 mph (104 km/h).
*Specifications are called out according to SAE recommended procedures. Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that described. **Load ratings for speeds up to 65 mph (104 km/h).
SPECIFICATIONS, S8B
DIMENSIONS* U.S. METRIC
Length    
    Overall 207 in 5.26 m
    Bed 156 in 3.96 m
    Tongue 51 in 1.30 m
Clearance, measured at jack footpad 9 in 229 mm
Coupler heights, adj. 14 in - 20 in 356 - 508 mm
Width    
    Between fenders 76 in 1.93 m
    Outside fenders 96 in 2.44 m
    Loading ramp 74 in 1.88 m
Loading ramp angle 12.5°  
Bed height (at full load) 18 in 457 mm
GENERAL U.S. METRIC
Number of axles 1  
Type of coupler 3-in lunette or 2 5/16-in ball  
Type of brakes Electric  
Electrical system 12V DC  
Lug nut torque 95 ft&middotlb 130 N&middotm
Safety chain size 3/8 in  
TIRE OPTIONS/PRESSURES U.S. METRIC
LT235/85R16 G 110 psi 758 kPa
LOAD RATINGS** U.S. METRIC
Empty weight, w/ standard ramp 1840 lb 834 kg
Tongue load, max. 975 lb 422 kg
GVWR 7500 lb 3402 kg
GAWR 7000 lb 3173 kg
MLWR 5660 lb 2567 kg
 
*Specifications are called out according to SAE recommended procedures. Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that described. **Load ratings for speeds up to 65 mph (104 km/h).

 

  • ESPECIFICACIONES S8B
SPECIFICATIONS, S8B
DIMENSIONS* U.S. METRIC
Length    
    Overall 207 in 5.26 m
    Bed 156 in 3.96 m
    Tongue 51 in 1.30 m
Clearance, measured at jack footpad 9 in 229 mm
Coupler heights, adj. 14 in - 20 in 356 - 508 mm
Width    
    Between fenders 76 in 1.93 m
    Outside fenders 96 in 2.44 m
    Loading ramp 74 in 1.88 m
Loading ramp angle 12.5°  
Bed height (at full load) 18 in 457 mm
GENERAL U.S. METRIC
Number of axles 1  
Type of coupler 3-in lunette or 2 5/16-in ball  
Type of brakes Electric  
Electrical system 12V DC  
Lug nut torque 95 ft&middotlb 130 N&middotm
Safety chain size 3/8 in  
TIRE OPTIONS/PRESSURES U.S. METRIC
LT235/85R16 G 110 psi 758 kPa
LOAD RATINGS** U.S. METRIC
Empty weight, w/ standard ramp 1840 lb 834 kg
Tongue load, max. 975 lb 422 kg
GVWR 7500 lb 3402 kg
GAWR 7000 lb 3173 kg
MLWR 5660 lb 2567 kg
 
*Specifications are called out according to SAE recommended procedures. Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that described. **Load ratings for speeds up to 65 mph (104 km/h).